Toro Heavy Duty Self-Propelled Mower Kawasaki 6 HP FJ180V Engine (21″) #22297 (Local Pickup Only)
Toro Heavy Duty Self-Propelled Mower Kawasaki 6 HP FJ180V Engine (21″) #22297 (Local Pickup Only) Original price was: $1,949.99.Current price is: $1,559.99.
Back to products
Toro Power Clear 21-Inch 60V Single-Stage Battery Snow Blower Kit (Battery & Charger)
Toro Power Clear 21-Inch 60V Single-Stage Battery Snow Blower Kit (Battery & Charger) Original price was: $749.00.Current price is: $599.20.

Toro Lawn Striping System “fits most 20″- 22″ walk behind mowers” #20601

Original price was: $146.67.Current price is: $117.34.

20601 Lawn Striping System Create patterns like the pros with Toros Lawn Striping System. Easily attaches to most walk-behind mowers and can be used with and without the bagger attached. All you need is a Phillips screwdriver and 20 lbs of dry sand. Mow and stripe at the same…

SKU: BC-toro-lawn-striping-system-fi Category: Tags: ,
Description

20601 Lawn Striping System

Create patterns like the pros with Toros Lawn Striping System. Easily attaches to most walk-behind mowers and can be used with and without the bagger attached. All you need is a Phillips screwdriver and 20 lbs of dry sand. Mow and stripe at the same time, its that easy.
  • Easy to install
  • Attaches to most walk-behind mowers
  • Use with or without bagger
Mower type
Fits most 20″ – 22″ walk-behind mowers
Width
Roller 22″
Weight Empty
8.7 lbs.
Weight Full
25 – 29 lbs. (varies by amount and density of sand added)

How It Works

How It Works

As you mow, the weight of the roller bends the grass down in the direction you are mowing.

Healthy, well maintained cool season grasses such as, but not limited to, Rye grass, Fescue, and Bluegrass pattern more easily. Warm season grasses such as Bermuda, St. Augustine and Zoysia do not pattern as well due to their coarseness. Please refer to the Zone Map as a refernece.

Visual results may vary based upon health of grass, length of grass, type of grass, available sunlight and seasonal conditions. Toro recommends that the Lawn Striping System not be used when grass is dormant or is under stress due to drought or disease.

Simple Installation

Simple Installation

The lawn striping system attaches in minutes. Read the 4 step installation guide and youll be patterning your lawn in no time.

All you need to get started is a Phillips screwdriver, 20 lbs of DRY sand and a funnel. Using fine dry sand will make it much easier to fill the lawn striper.

Create Vivid Patterns

Create Vivid Patterns

The Lawn Striping System includes a pattern guide to help you create vivid stripes and patterns on your lawn. Virtually any pattern can be created with some planning and imagination.

You can also view this how-to video to get started. View Video

Bagger Friendly Design

Bagger Friendly Design

Whether you use your mower in Recycler, mulching, bagging, or side discharge mode, the Lawn Striping System is the perfect solution.

The Lawn Striping System attaches low on the handle of your mower so its out of the way of most bagger attachments.

Impacting Your Lawn

Impacting Your Lawn

The lawn striping system will not hurt your grass. It gently bends the grass leaves in the direction you are mowing. It does not fold or break the leaves.

To enhance the health of your lawn, Toro recommends varying your mowing patterns or angles each time you mow.

Do not use the lawn striping system on dormant, stressed or diseased turf.

The Toro Lawn Striping System has been tested and approved for Toro equipment and should not impact the performance of your self-propelled system. If you notice grinding, surging or other unusual drive behavior, you should consult an authorized dealer for service.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Toro Lawn Striping System “fits most 20″- 22″ walk behind mowers” #20601”

Your email address will not be published. Required fields are marked *

Shipping and Delivery

Shipping and Delivery

NexaDigital delivers commercial heavy equipment and machinery across the United States only. Orders are supplied factory direct and coordinated for freight delivery.

Standard Shipping

Standard freight delivery is $149.00 per order, United States only, with standard delivery within 14 days of your order.

  • Delivery is available within the United States only. NexaDigital does not offer international shipping.
  • Commercial heavy equipment is delivered by freight delivery, not small parcel delivery.
  • Standard freight shipping is $149.00 per order. New customers can get free shipping on their first 3 orders by entering code NEWCUSTOMER at checkout. This coupon allows free shipping only, is limited to 3 uses per customer, and is not automatic free shipping for all orders.
  • Keep the delivery address accurate and accessible for a freight truck. Confirm site access and contact details at checkout, and keep your phone and email available for delivery coordination.
  • Allow space for a large item to be unloaded at delivery.
  • At delivery, check the equipment and note any visible damage or missing parts before signing if you are asked to sign. If anything is damaged or incorrect, contact NexaDigital promptly through Contact Us with your order details.
  • For returns and help, see the Return Policy, Refund Policy, and Support pages.

How shipping is calculated

Standard freight shipping is $149.00 per order for delivery in the United States within 14 days. The shipping cost shown at checkout for your order is the cost that applies to that order, unless we contact you about a change before dispatch. New customers can get free shipping on their first 3 orders by entering code NEWCUSTOMER at checkout. The coupon is required, allows free shipping only, and is limited to 3 uses per customer. Free shipping is not automatic for all orders.

How freight delivery is coordinated

Because this is heavy equipment, delivery is arranged as freight delivery, not as a small parcel shipment. After you order, delivery is coordinated based on the product and the delivery address entered at checkout. Make sure your delivery address, site access details, and contact details are correct at checkout, and keep your phone and email available so delivery can be arranged.

What to expect at delivery

  • Plan for a freight delivery and allow space for a large item to be unloaded.
  • Check the equipment when it arrives and note any visible damage or missing parts before you sign, if you are asked to sign.
  • If something looks damaged or incorrect, contact NexaDigital promptly through the Contact Us page and include your order details.

For the full terms, see the pages below.
Shipping Policy | Return Policy | Refund Policy | Support | Contact Us