Bendpak Dual-width, 10,000 lb capacity, Clearfloor
Original price was: $6,095.00.$4,876.00Current price is: $4,876.00.
The safe and rugged XPR-10S-168 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The adjustable width design allows you to choose the best setting for your specific space…
The safe and rugged XPR-10S-168 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak’s XPR two-post models feature dual “direct-drive” low-pressure cylinders, maintenance free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configurations for increased arm positioning versatility.
- 10,000-lb lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Bolt-on 24″ column extensions provide added overhead clearance
- Expandable top beam accommodates wide or narrow configurations
- Padded overhead safety shutoff bar
- Single-piece columns
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53″ tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17″ x 19″ A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Single-point safety release
- Safety locks in each column spaced every 3″
- Automatic arm restraints
- Heavy-duty 1/2″ aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63 mm stackable adapter set comes standard
- Triple-telescoping arms
- Versatile drop-in contact pads with stackable adapters
- ALI Approved.
| MODEL | XPR-10S-168 |
|---|---|
| Lifting Capacity* | 10,000 Lbs. / 4,536 kg. |
| *Max Capacity / Front Axle | 5,000 Lbs. / 2,268 kg. |
| *Max Capacity / Rear Axle | 5,000 Lbs. / 2,268 kg. |
| A – Height Overall: | 169″ / 4,293 mm.* |
| B – Width Overall: (NARROW) | 132″ / 3,353 mm. |
| B – Width Overall: (WIDE) | 145″ / 3,683 mm. |
| C – Width Outside of Columns: (NARROW) | 126-3/4″ / 3,225 mm. |
| C – Width Outside of Columns: (WIDE) | 139-3/4″ / 3,555 mm. |
| D – Floor To Overhead Switch: | 165″ / 4,191 mm.* |
| E – Inside Columns: (NARROW) | 105.5″ / 2,680 mm. |
| E – Inside Columns: (WIDE) | 118.5″ / 3,010 mm. |
| F – Reach (Front Arm Min.): | 27-1/2″ / 698 mm. |
| G – Reach (Front Arm Max.): | 51-1/2″ / 1,308 mm. |
| H – Reach (Rear Arm Min.): | 34″ / 863 mm. |
| I – Reach (Rear Arm Max.): | 54-1/2″ / 1,384 mm. |
| J – Min. Pad Height: | 4.25″ – 6-3/4″ / 108 mm. – 171 mm. |
| K – Rise: | 69″ / 1,753 mm. |
| L – Max Lift Height (Pad Only): | 73″ – 75″ / 1,854 – 1,905 mm. |
| M – Max Lift Height (3″ Adapter): | 75.5″ – 77.5″ / 1,917 mm. – 1,968 mm. |
| N – Drive-Thru Clearance: (NARROW) | 93″ / 2,362 mm. |
| N – Drive-Thru Clearance: (WIDE) | 106″ / 2,692 mm. |
| Screw Pad Adjustment: | 2″ / 51 mm. |
| Motor (**) | 220 VAC / 60 Hz. 1Ph. |
| Time of full Rise: | 45 Seconds |
| Max Load Per Arm: | 2,500 Lbs. / 1134 Kg. |
Shipping and Delivery
NexaDigital delivers commercial heavy equipment and machinery across the United States only. Orders are supplied factory direct and coordinated for freight delivery.
Standard Shipping
Standard freight delivery is $149.00 per order, United States only, with standard delivery within 14 days of your order.
- Delivery is available within the United States only. NexaDigital does not offer international shipping.
- Commercial heavy equipment is delivered by freight delivery, not small parcel delivery.
- Standard freight shipping is $149.00 per order. New customers can get free shipping on their first 3 orders by entering code NEWCUSTOMER at checkout. This coupon allows free shipping only, is limited to 3 uses per customer, and is not automatic free shipping for all orders.
- Keep the delivery address accurate and accessible for a freight truck. Confirm site access and contact details at checkout, and keep your phone and email available for delivery coordination.
- Allow space for a large item to be unloaded at delivery.
- At delivery, check the equipment and note any visible damage or missing parts before signing if you are asked to sign. If anything is damaged or incorrect, contact NexaDigital promptly through Contact Us with your order details.
- For returns and help, see the Return Policy, Refund Policy, and Support pages.
How shipping is calculated
Standard freight shipping is $149.00 per order for delivery in the United States within 14 days. The shipping cost shown at checkout for your order is the cost that applies to that order, unless we contact you about a change before dispatch. New customers can get free shipping on their first 3 orders by entering code NEWCUSTOMER at checkout. The coupon is required, allows free shipping only, and is limited to 3 uses per customer. Free shipping is not automatic for all orders.
How freight delivery is coordinated
Because this is heavy equipment, delivery is arranged as freight delivery, not as a small parcel shipment. After you order, delivery is coordinated based on the product and the delivery address entered at checkout. Make sure your delivery address, site access details, and contact details are correct at checkout, and keep your phone and email available so delivery can be arranged.
What to expect at delivery
- Plan for a freight delivery and allow space for a large item to be unloaded.
- Check the equipment when it arrives and note any visible damage or missing parts before you sign, if you are asked to sign.
- If something looks damaged or incorrect, contact NexaDigital promptly through the Contact Us page and include your order details.
For the full terms, see the pages below.
Shipping Policy | Return Policy | Refund Policy | Support | Contact Us
Related products
16×12 Hawthorne Traditional Steel Pergola With Sail Shade Soft Canopy
Original price was: $2,799.00.$2,239.20Current price is: $2,239.20.
Reviews
There are no reviews yet.